Replace worn, compressed, or deteriorated factory cab mounts on your 2008-2016 Ford Super Duty with the Mishimoto Silicone Body Mount Kit for Regular Cab and Extended Cab trucks.
The factory rubber body mounts on Ford Super Duty trucks are subjected to years of engine heat, towing, hauling, road exposure, chassis flex, and constant compression. As the original rubber ages, it can crack, harden, dry rot, and collapse, allowing the cab to sag or shift out of alignment with the bed.
This complete 6-bushing silicone body mount kit replaces the aging factory mounts with premium silicone bushings designed to retain their resilience while helping isolate the cab from chassis noise, vibration, and harshness.
Mishimoto also includes dual-coated steel mounting cups and a complete Dacromet-coated hardware package, making this a comprehensive replacement for worn Super Duty body mounts.
KEY FEATURES
-
Complete 6-bushing body mount kit
-
Fits 2008-2016 Ford Super Duty Regular Cab and Extended Cab trucks
-
Premium silicone bushing construction
-
Direct replacement for worn factory rubber cab mounts
-
Helps restore proper cab ride height
-
Helps restore cab-to-bed alignment
-
Helps isolate noise, vibration, and harshness (NVH)
-
Silicone resists cracking, hardening, and dry rot
-
Avoids the dry squeaking commonly associated with some urethane-style mounts
-
Dual-coated steel mounting cups for improved corrosion resistance
-
Complete Dacromet-coated mounting hardware
-
Captured-nut anti-rotation design simplifies installation
-
Uses factory OEM body mount locations
-
No drilling, cutting, or modification required
-
Ideal for work trucks, tow rigs, daily drivers, and higher-mileage Super Duty pickups
-
Backed by Mishimoto's applicable Lifetime Warranty
REPLACE WORN FACTORY SUPER DUTY BODY MOUNTS
Body mounts provide a controlled connection between the cab and the truck's frame while isolating the passenger compartment from chassis vibration.
As factory rubber mounts deteriorate, they can:
-
Compress
-
Crack
-
Split
-
Harden
-
Dry rot
-
Lose their original height
-
Allow excessive cab movement
Common signs of worn Super Duty body mounts may include:
-
Excessive vibration inside the cab
-
Increased road or drivetrain noise
-
Squeaks or clunks around the cab
-
Harsh ride quality
-
Visible cracked or compressed rubber mounts
-
Cab sagging
-
Uneven cab-to-bed body lines
-
Excessive cab movement relative to the frame
Replacing worn mounts can help restore proper cab positioning while improving isolation between the frame and passenger compartment.
PREMIUM SILICONE CONSTRUCTION
Mishimoto uses premium silicone rather than conventional replacement rubber or harder urethane-style materials.
The silicone construction is designed to retain its flexibility and resilience over long-term use without developing many of the age-related problems found in factory rubber.
Silicone helps resist:
-
Dry rot
-
Cracking
-
Hardening
-
Permanent compression
-
Heat-related deterioration
-
Age-related degradation
Unlike some aftermarket urethane mounts, silicone is also designed to avoid the dry squeaking that can develop as those materials age.
HELPS RESTORE CAB HEIGHT & BODY ALIGNMENT
When factory mounts collapse or compress, the cab can gradually sit lower on the frame.
This can create uneven body gaps and visible misalignment between the cab and bed.
Fresh body mounts help restore the cab closer to its intended height and position, improving overall body alignment while maintaining the isolation needed for a comfortable truck.
HELPS CONTROL NOISE, VIBRATION & HARSHNESS
Body mounts are an important part of the truck's NVH isolation system.
Worn mounts can allow chassis vibration to transfer more directly into the cab and surrounding components.
Mishimoto's silicone mounts help absorb and isolate vibration from:
-
The frame
-
Road impacts
-
Drivetrain movement
-
Chassis flex
-
General road noise
Maintaining proper body mount condition can also help reduce unnecessary vibration reaching nearby components such as cooling-system hoses and radiator-support components.
DUAL-COATED STEEL MOUNTING CUPS
Mishimoto includes steel mounting cups protected by two layers of corrosion-resistant coating.
Body mounts operate in a harsh area of the vehicle routinely exposed to:
-
Water
-
Mud
-
Road debris
-
Snow
-
Salt
-
Humidity
The dual-coated steel cups are designed to resist corrosion and help prevent the rust deterioration that commonly affects older factory body mount assemblies.
COMPLETE DACROMET-COATED HARDWARE
The kit includes the necessary bolts, nuts, and washers with a Dacromet corrosion-resistant finish.
This allows worn or rusted factory hardware to be replaced rather than reused during installation.
The Dacromet coating provides enhanced corrosion protection for trucks exposed to road salt, moisture, work-site conditions, and off-road environments.
CAPTURED-NUT ANTI-ROTATION DESIGN
Mishimoto uses a captured-nut anti-rotation system designed to hold the nut in place while the mounting hardware is tightened from below.
This simplifies installation by reducing the need to access and hold both sides of the mounting hardware at the same time.
The design can make a normally awkward body mount installation much easier to manage.
VEHICLE FITMENT
Fits 2008-2016 Ford Super Duty Regular Cab and Extended Cab applications, including applicable:
-
2008 Ford F-250 Super Duty Regular Cab
-
2008 Ford F-250 Super Duty Extended Cab
-
2008 Ford F-350 Super Duty Regular Cab
-
2008 Ford F-350 Super Duty Extended Cab
-
2009 Ford F-250 Super Duty Regular Cab
-
2009 Ford F-250 Super Duty Extended Cab
-
2009 Ford F-350 Super Duty Regular Cab
-
2009 Ford F-350 Super Duty Extended Cab
-
2010 Ford F-250 Super Duty Regular Cab
-
2010 Ford F-250 Super Duty Extended Cab
-
2010 Ford F-350 Super Duty Regular Cab
-
2010 Ford F-350 Super Duty Extended Cab
-
2011 Ford F-250 Super Duty Regular Cab
-
2011 Ford F-250 Super Duty Extended Cab
-
2011 Ford F-350 Super Duty Regular Cab
-
2011 Ford F-350 Super Duty Extended Cab
-
2012 Ford F-250 Super Duty Regular Cab
-
2012 Ford F-250 Super Duty Extended Cab
-
2012 Ford F-350 Super Duty Regular Cab
-
2012 Ford F-350 Super Duty Extended Cab
-
2013 Ford F-250 Super Duty Regular Cab
-
2013 Ford F-250 Super Duty Extended Cab
-
2013 Ford F-350 Super Duty Regular Cab
-
2013 Ford F-350 Super Duty Extended Cab
-
2014 Ford F-250 Super Duty Regular Cab
-
2014 Ford F-250 Super Duty Extended Cab
-
2014 Ford F-350 Super Duty Regular Cab
-
2014 Ford F-350 Super Duty Extended Cab
-
2015 Ford F-250 Super Duty Regular Cab
-
2015 Ford F-250 Super Duty Extended Cab
-
2015 Ford F-350 Super Duty Regular Cab
-
2015 Ford F-350 Super Duty Extended Cab
-
2016 Ford F-250 Super Duty Regular Cab
-
2016 Ford F-250 Super Duty Extended Cab
-
2016 Ford F-350 Super Duty Regular Cab
-
2016 Ford F-350 Super Duty Extended Cab
ENGINE APPLICATIONS
This body mount kit is cab-configuration specific rather than engine specific and is applicable to properly equipped 2008-2016 Super Duty Regular and Extended Cab trucks, including applications with:
-
6.4L Powerstroke Diesel
-
6.7L Powerstroke Diesel
-
Applicable gasoline engines
Always verify year and cab configuration before ordering.
IMPORTANT FITMENT NOTE
This listing is for the 6-bushing Regular Cab / Extended Cab kit only.
This kit does NOT fit Crew Cab trucks.
INSTALLATION
This kit is designed as a direct-fit replacement using the original factory body mount locations.
No drilling, cutting, or permanent vehicle modification is normally required.
Body mount replacement requires portions of the truck cab to be properly supported and raised from the frame.
Before installation, inspect the surrounding:
-
Cab mounting brackets
-
Frame mounting points
-
Body mount pockets
-
Sheet metal
-
Factory hardware
Older Super Duty trucks may have corrosion or structural damage around the original mounting locations that should be repaired before installing new body mounts.
Professional installation is recommended if you are not familiar with cab mount replacement procedures.
