WCFab WCF100854 60" Traction Bar Kit

The Wehrli Custom Fab WCF100854 60" Traction Bar Kit from XDP helps to prevent axle wrap in your performance-built truck. When you increase the horsepower on your diesel truck, you must improve the traction bars to stop the axle from twisting, which can cause driveshafts, twisted axle housings, and even broken u-joints. To adjust the torsion on the axle and to raise or lower the rear of your truck, Wehrli utilizes a premium RockJock rebuildable and greaseable Heim connection at the frame. This kit reduces noise and vibration at the axle connection by using heavy-duty Polyurethane Bushing, which is a common issue when using a solid Heim on both ends. The bars are bolted to the axle and frame mounts using grade 8 hardware. 

Features:

• Bolt-On Axle Side Mounts
  
• Grade 8 Hardware Included
• Weld-On Frame Side Mounts
• 60" Heavy-Duty Traction Bars
• Lifetime Warranty Against Bending Or Breaking
• Frame Side RockJock "Johnny Joint" Heim Connections
• Epoxy Primer Base Coat Before Powder Coat Application
• Polyurethane Bushings Reduce Noise & Vibration (Axle Side)

Manufacturer Warranty*:
1 Year

Note:
Fits Regular Cab Long Bed, Extended Cab Short Bed & Crew Cab Short Bed.
If you have Extended Cab Long Bed, or Crew Cab Long Bed truck use part number WCF100855.
2011-2016 Ford F-250 and F-350 Crew Cab Short Bed Please use 68" bars part number WCF100855.
Not compatible with 2014-2018 Ram 2500 trucks equipped with rear coil springs / linked suspension setups.
If you have a Lift Kit and your rear lift block is taller than 5" or your total lift height is 6" or greater, use part number WCF100855.
If your truck is on a big lift, please measure from your axle mounting point to your frame mounting point to ensure the bar length will work properly for your application.