The Pacbrake 24V HP625 Series Heavy Duty Air Compressor - Vertical Pump Head HP10625V-24 delivers powerful and effortless inflation at your fingertip. Pacbrake's HP625 Series Air Compressors have a 100% duty cycle (60 minutes @ 100 psi). The 3/4 horsepower compressor utilizes an oil-less design, sealed bearings, a PTFE piston ring, a copper wire wound permanent magnet motor and a cast steel cylinder with a hard anodized aluminum sleeve. Does not include installation hardware or pre-built harness.
Weight : 18.5 lbs [8.39 kg]
Size: 11.5 inch x 9.5 inch x 6 inch (LxWxH) / [293mm x 242mm x 153mm]
Ambient Temperature Range : -22F to 158F [-30C to 70C]
Max Duty Cycle: 100% (60 minutes @ 100 psi)
Ingress Protection: IP52 (IP55 w/ Remote Air Intake kit: HP10115)
Rated Flow: 3.4 SCFM
Max Working Pressure: 150 psi [1034 kPa]
Max Continuous Run Time: 60 minutes
Max Restart Pressure: 5 psi [35 kPa]
Motor Type: Permanent magnet DC
Operating Voltage: 24 VDC ±15%
Nominal Power: 3/4 HP [0.56 kW]
Nominal Speed: 3000RPM
Features:
- Gunmetal Grey Finish
- Voltage: 24 VDC
- Horsepower: 3/4 HP
- Vertical Head Configuration
- Duty Cycle: 100% (60 minutes @ 100 psi)
- Max Working Pressure: 150 psi [1034 kPa]
Weight : 18.5 lbs [8.39 kg]
Size: 11.5 inch x 9.5 inch x 6 inch (LxWxH) / [293mm x 242mm x 153mm]
Ambient Temperature Range : -22F to 158F [-30C to 70C]
Max Duty Cycle: 100% (60 minutes @ 100 psi)
Ingress Protection: IP52 (IP55 w/ Remote Air Intake kit: HP10115)
Rated Flow: 3.4 SCFM
Max Working Pressure: 150 psi [1034 kPa]
Max Continuous Run Time: 60 minutes
Max Restart Pressure: 5 psi [35 kPa]
Motor Type: Permanent magnet DC
Operating Voltage: 24 VDC ±15%
Nominal Power: 3/4 HP [0.56 kW]
Nominal Speed: 3000RPM
Manufacturer Warranty*:
2 Year / 24,000 Mile
2 Year / 24,000 Mile
Note:
Optional Air Intake Kit (HP10115) is available separately for added protection against significant exposure to the elements.
Unloader Assembly (HP10116) is required for use with an air tank.
Does not include any pre-built harnesses (See Premium Kits: HP10628 / HP10629)
Raw Compressor only - Does not include installation hardware (See Basic Kits: HP10631 / HP10632)
Optional Air Intake Kit (HP10115) is available separately for added protection against significant exposure to the elements.
Unloader Assembly (HP10116) is required for use with an air tank.
Does not include any pre-built harnesses (See Premium Kits: HP10628 / HP10629)
Raw Compressor only - Does not include installation hardware (See Basic Kits: HP10631 / HP10632)