The Pacbrake 24V HP625 Series Heavy Duty Air Compressor Kit - Vertical Pump Head (Premium) HP10630 enables quick and effortless inflation power. Pacbrake's HP625 Series (Premium) Air Compressor kits have a 100% duty cycle (60 minutes @ 100 psi). These 3/4 horsepower compressors have an oil-less design, sealed bearings, a PTFE piston ring, a copper wire wound permanent magnet motor and a cast steel cylinder with a hard anodized aluminum sleeve. Includes all compressor installation hardware and premium pre-built harnesses
Specifications:
Weight : 18.5 lbs [8.39 kg]
Size: 11.5 inch x 9.5 inch x 6 inch (LxWxH) / [293mm x 242mm x 153mm]
Ambient Temperature Range : -22F to 158F [-30C to 70C]
Max Duty Cycle: 100% (60 minutes @ 100 psi)
Ingress Protection: IP52 (IP55 w/ Remote Air Intake kit: HP10115)
Rated Flow: 3.4 SCFM
Max Working Pressure: 150 psi [1034 kPa]
Max Continuous Run Time: 60 minutes
Max Restart Pressure: 5 psi [35 kPa]
Motor Type: Permanent magnet DC
Operating Voltage: 24 VDC ±15%
Nominal Power: 3/4 HP [0.56 kW]
Nominal Speed: 3000RPM
Features:
- Gunmetal Grey Finish
- Voltage: 24 VDC
- Horsepower: 3/4 HP
- Vertical Head Configuration
- Duty Cycle: 100% (60 minutes @ 100 psi)
- Max Working Pressure: 150 psi [1034 kPa]
- Includes All Compressor Installation Hardware and Premium Pre-Built Harnesses
Specifications:
Weight : 18.5 lbs [8.39 kg]
Size: 11.5 inch x 9.5 inch x 6 inch (LxWxH) / [293mm x 242mm x 153mm]
Ambient Temperature Range : -22F to 158F [-30C to 70C]
Max Duty Cycle: 100% (60 minutes @ 100 psi)
Ingress Protection: IP52 (IP55 w/ Remote Air Intake kit: HP10115)
Rated Flow: 3.4 SCFM
Max Working Pressure: 150 psi [1034 kPa]
Max Continuous Run Time: 60 minutes
Max Restart Pressure: 5 psi [35 kPa]
Motor Type: Permanent magnet DC
Operating Voltage: 24 VDC ±15%
Nominal Power: 3/4 HP [0.56 kW]
Nominal Speed: 3000RPM
Manufacturer Warranty*:
2 Year / 24,000 Mile
2 Year / 24,000 Mile
Note:
Optional Air Intake Kit (HP10115) is available separately for added protection against significant exposure to the elements.
HP625 series compressors require the use of the unloader assembly (included in this Premium kit) for use with an air tank.
Not approved for use with tanks over 2.5 gallons.
Optional Air Intake Kit (HP10115) is available separately for added protection against significant exposure to the elements.
HP625 series compressors require the use of the unloader assembly (included in this Premium kit) for use with an air tank.
Not approved for use with tanks over 2.5 gallons.
