Transgo

Transgo Sk Allison Jr Shift Kit For 2006-2010 GM 2500HD/3500HD With Allison 6-Speed Transmission

Transgo Sk Allison Jr Shift Kit For 2006-2010 GM 2500HD/3500HD With Allison 6-Speed Transmission

Transgo

Write a Review
SKU:
SK Allison-JR
Width:
1.00 (in)
Height:
6.00 (in)
Depth:
4.00 (in)
Now: $80.60
Adding to cart… The item has been added

Transgo Sk Allison Jr  Shift Kit For 2006-2010 GM 2500HD/3500HD With Allison 6-Speed Transmission

This TransGo Allison-Jr SHIFT KIT® Valve Body Repair Kit fits 2005 to 2010 General Motors vehicles equipped with the Allison 1000, 2000 and 2400 six-speed automatic transmission.            Note: The five-speeds have an external MLP switch, while the six-speeds have an internal MLP switch.

This kit can be installed in 2001 to 2005 vehicles with the Allison five-speed transmission, however, using this kit with these first design earlier five-speeds will not provide the 111% increase in torque capacity needed for 4th and 5th gear. Repeated failure of the C2 on these five-speed units is a common complaint, therefore we highly recommend installing part # ALLISON SK instead of this Allison-Jr for these early five speed units.

Common complaints on this transmission are: neutralizes under heavy load in 4th or 5th, stuck in one gear as well as gear ratio and solenoid performance codes.

Features and benefits:
The included valve body components in this kit are designed to provide substantial gains in friction plate durability. With this kit installed, the friction torque capacity of the holding clutches and brakes in 2nd through 6th gear is increased by approximately 100% when the lock-up clutch is off and line pressure is at maximum. Since transmission removal is not required, install it before adding engine horsepower to prevent internal damage.

Corrects/Prevents/Reduces:
Slip 3-4
Neutralizes under load in 3rd or 4th
Burnt C2 and C3 friction plates
Stuck in one gear
Codes: P0732, P0733, P0734, P0735, P0766 and P0777
Includes:
(2) USA-made hardened steel trim valves, balls, inner and outer springs
Drill bit