The Synergy 8580-04 Long Arm Upgrade Kit from XDP is designed to improve your Dodge Ram 2500/3500 suspension geometry while off-roading. Shorter control arm angles are hard on a vehicle's suspension components which leads to poor vehicle handling, limited suspension travel, and an overall bumpy ride as the shocks produce a choppy movement as you drive. By using the Synergy long arm kit a better angle is achieved, which offers more range of motion and doesn't put undue stress on the truck's suspension components. Pair these control arms with the Synergy Heavy Duty Adjustable Front Track Bar part number 8550-11 to fully recenter your axle and achieve the best alignment possible.
Features:
- Synergy Dual Durometer Teflon Lined Bushings
- Powder Coat Finish For Maximum Durability And Corrosion Resistance
- Synergy Double Adjuster Sleeve & Pinch Bolt Assembly Allows For Easy Adjustment Of Control Arms
- Long Arm Kit Was Designed Using OEM CAD Files For A Perfect Fitment & Enhanced Vehicle Drivability
- 100% Bolt On Components Assures An Easy, Trouble Free Installation With The Use Of Basic Hand Tools
- Can Be Installed On Anything From A Completely Stock Truck To A 6" Lift And 12" Stroke 3.0" Diameter Shocks
Kit Specifications:
- Upper Control Arms Are Manufactured From High-Quality Crush Resistant 1.75 X .188 Wall 1026 DOM Tubing
- Lower Control Arms Are Manufactured From High-Quality Crush Resistant 2.0" X .250 Wall 1026 DOM Tubing
Note:
2013 Dodge Ram 3500's were a split year for production. If your truck has radius arms use Dodge Ram 2014+ kit.
Engineered to fit trucks with 0" - 6" of lift height
Upgrading to long arms requires cutting, grinding, and drilling as well as removal of the stock control arm brackets at the frame; We recommend all cutting / grinding / welding be done by an experienced welder / fabricator
To prevent front tires from rubbing the control arms at full steering lock, we recommend the following wheel/tire combinations:
Most 37 inch tires - wheels must have no more than 4.5 inches of backspacing
Most 40 inch tires - wheels must have no more than 3.75 inches of backspacing
Please note: Tire dimensions and sizing vary from manufacturer to manufacturer
While this is a bolt on kit, welding the brackets after installation is a clean, reliable method
8565 Cam Bolt Eliminators recommended for increased strength and extended bushing life
Additional bushing sleeves are included for 2010 - 2013 models with larger bolt diameters
2013 Dodge Ram 3500's were a split year for production. If your truck has radius arms use Dodge Ram 2014+ kit.
Engineered to fit trucks with 0" - 6" of lift height
Upgrading to long arms requires cutting, grinding, and drilling as well as removal of the stock control arm brackets at the frame; We recommend all cutting / grinding / welding be done by an experienced welder / fabricator
To prevent front tires from rubbing the control arms at full steering lock, we recommend the following wheel/tire combinations:
Most 37 inch tires - wheels must have no more than 4.5 inches of backspacing
Most 40 inch tires - wheels must have no more than 3.75 inches of backspacing
Please note: Tire dimensions and sizing vary from manufacturer to manufacturer
While this is a bolt on kit, welding the brackets after installation is a clean, reliable method
8565 Cam Bolt Eliminators recommended for increased strength and extended bushing life
Additional bushing sleeves are included for 2010 - 2013 models with larger bolt diameters
