The ReadyLift 43-19642 6" Lift MAX3.3 Suspension System With Radius Arms will allow you to run larger tires on your 2019-2024 Ram 2500 6.7L Diesel. This lift kit provides plenty of room for an aggressive 37x12.5 tire and up to +01 to +18 offset wheel with no rubbing, delivering a tough, beefy look.
The MAX3.3 Suspension System is specifically designed for your truck and features patented front single-rate and rear dual-rate coil springs. These spring rates provide comfort while empty but still allow you to tow heavy loads. Heavy-duty fabricated steel front and rear track bar brackets, a forged dropped pitman arm, and front & rear sway bar relocation brackets allow the suspension to articulate properly. The bump stop extensions prevent over-compression of the adjustable front & rear Falcon 3.3 shocks included in this kit.
Aligning the front output shaft for improved driveline angles is easy thanks to the CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case. Due to driveline angle sensitivity, some Ram HD trucks can experience a slight vibration after lifting. This DIS addresses this problem by indexing the transfer case and providing a stout, heavy-duty steel cross member that accommodates the new T-case position. This corrected position results in a smooth driving experience on or off-road.
The Tubular Radius Arms included with this kit are designed to correct the caster angle to provide proper suspension geometry. These Radius Arms are heavy-duty and are manufactured to handle the use and abuse required by Ram truck owners. These units perform as critical alignment components, correcting the suspension geometry on lifted applications. The arms are made inward allowing for additional clearance and providing even more room for larger tires. The direct bolt-on design promotes quick and easy installation.
The Falcon 3.3 Shocks feature Red Line High VI Shock Oil with anti-wear and lubricity agents and a reservoir design that increases the nitrogen-to-oil ratio. These two components allow for consistent damping over a wide range of temperatures from -50 F to 450 F. The shock body is manufactured from hard anodized large bore 6061-t6 aluminum for impact and corrosion resistance as well as increased oil volume for reliable performance.
The Falcon 3.3 Fast Adjust Dampers offer a wide range of adjustability for specific terrain and/or handling characteristics with two separate knobs to tune to your preference. A 3-position fast adjust knob allows you to switch from soft, custom, and firm compression to adjust the ride to your needs. The soft setting allows a partial bypass of the main piston for a softer ride. VOD (Volume Optimized Damping) features a digressive linear piston for faster ramp-up for decreased body roll and an overall increase in damping to minimize bottom out when pushed to the limit.
Tire Fitment Notes:
Maximum fitment: 37x12.50 tire
37x12.50 Tires On 9" Wide Wheels With +01 To +18 Offset
The MAX3.3 Suspension System is specifically designed for your truck and features patented front single-rate and rear dual-rate coil springs. These spring rates provide comfort while empty but still allow you to tow heavy loads. Heavy-duty fabricated steel front and rear track bar brackets, a forged dropped pitman arm, and front & rear sway bar relocation brackets allow the suspension to articulate properly. The bump stop extensions prevent over-compression of the adjustable front & rear Falcon 3.3 shocks included in this kit.
Aligning the front output shaft for improved driveline angles is easy thanks to the CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case. Due to driveline angle sensitivity, some Ram HD trucks can experience a slight vibration after lifting. This DIS addresses this problem by indexing the transfer case and providing a stout, heavy-duty steel cross member that accommodates the new T-case position. This corrected position results in a smooth driving experience on or off-road.
The Tubular Radius Arms included with this kit are designed to correct the caster angle to provide proper suspension geometry. These Radius Arms are heavy-duty and are manufactured to handle the use and abuse required by Ram truck owners. These units perform as critical alignment components, correcting the suspension geometry on lifted applications. The arms are made inward allowing for additional clearance and providing even more room for larger tires. The direct bolt-on design promotes quick and easy installation.
The Falcon 3.3 Shocks feature Red Line High VI Shock Oil with anti-wear and lubricity agents and a reservoir design that increases the nitrogen-to-oil ratio. These two components allow for consistent damping over a wide range of temperatures from -50 F to 450 F. The shock body is manufactured from hard anodized large bore 6061-t6 aluminum for impact and corrosion resistance as well as increased oil volume for reliable performance.
The Falcon 3.3 Fast Adjust Dampers offer a wide range of adjustability for specific terrain and/or handling characteristics with two separate knobs to tune to your preference. A 3-position fast adjust knob allows you to switch from soft, custom, and firm compression to adjust the ride to your needs. The soft setting allows a partial bypass of the main piston for a softer ride. VOD (Volume Optimized Damping) features a digressive linear piston for faster ramp-up for decreased body roll and an overall increase in damping to minimize bottom out when pushed to the limit.
Features:
- Front & Rear Falcon 3.3 Shocks
- Heavy-Duty Transmission Crossmember
- Tubular Radius Arms Correct Caster Angle
- 1-Piece Bronze Piston Wear Band With O-Ring
- Hard Anodized 6061-T6 Aluminum Alloy Billet Piston
- Maintains Factory Suspension Geometry & Articulation
- Driveline Indexing System With Transfer Case Clocking Ring
- 8-Position Micro Adjust Dial Offers Refined Damping Adjustments
- 6" Front Lift With A Coil Spring Rear Lift For The Perfect Lifted Stance
- Allows For Up To 37x12.50 Tires On 9" Wide Wheels With +01 To +18 Offset
- Adjustable Shocks Have Large Shaft Diameter Providing A Wide Range Of Adjustments
- Maintains Factory Turning Radius Without Rubbing When Using The Recommended Wheel & Tire Size
Tire Fitment Notes:
Maximum fitment: 37x12.50 tire
37x12.50 Tires On 9" Wide Wheels With +01 To +18 Offset
Note: This Lift Kit will not fit any models with HEMI Gasoline engines, dually models, Classic models, and any automatic-leveling rear air suspension models.
