BDS Suspension BDS123409 Recoil Traction Bars

Add the BDS Suspension BDS123409 Recoil Traction Bars and upgrade the suspension on your pickup. These traction bars have internal compression springs that can be loaded or unloaded while installed on your truck to control axle wrap. Engineered to improve traction and limit axle wrap, these bars will not negatively affect suspension travel or ride quality. These next-generation Recoil traction bars offer you the freedom to tune the spring compression for optimal performance on-road, off-road, towing, or competition pulling. Recoil traction bars can be used on stock-height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full-floating design that won't bind up, allowing the full range of wheel travel without limiting articulation.

These new Recoil traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16" wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. The axle mount uses the tried-and-true BDS large, forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with a large 1-1/4" -12 threaded shank, a single-sided snap ring, and a 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end, these bars use a durometer-specific polyurethane bushing that freely floats in the traction bar, utilizing a pair of dual-stage internal compression springs and UHMW polyurethane bearings. Both ends are greaseable and serviceable.