Rough Country CV Rear Drive Shaft for 4-6-inch Lifts 5088.1
- CV Rear Drive Shaft for 4-6-inch Lifts
- Kit Contents: Extended CV drive shaft, flanges/yokes, and hardware
- Fits "Rubicon" models only
- Does not fit Unlimited LJ models
- Recommended on models with 4-6-inches of lift.
Jeep: 03-06 Wrangler TJ 4WD
- Flexes to a nominal 30 degrees prior to binding
- Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep
- Direct bolt-in replacement
- Does not require removing the factory original out-put mass vibration dampener hub
- Includes better quality CV joints
- Shaft strength is twice as strong as the factory equipped drive shaft
- Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep
- Includes better quality CV joints
- Features massive 1350 CV head
- Shaft strength is twice as strong as the factory equipped drive shaft
This double cardan style CV drive shaft is recommended for Jeep TJ Rubicon models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking. This drive shaft will flex to a nominal 30°s prior to binding and is a direct bolt in replacement that does not require removing the factory original out-put mass vibration dampener hub. It is built on a 2.5in tube diameter and uses the stock 1330 sized universal joint at the rear differential end and a massive 1350 CV head.
Kit Contents: Extended CV drive shaft, flanges/yokes, and hardware;Fits "Rubicon" models only; Does not fit Unlimited LJ models; Recommended on models with 4-6-inches of lift;Manufacturer: Rough Country Suspension Systems; Part Number: 5088.1; Weight (Lbs): 21.8; Install Time (Hours): 2-3
