Rough Country CV Front Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts 5071.1A
- Kit Contents: Extended CV drive shaft, flanges/yokes, hardware
- Fits Dana 30 Dana 44 front axles only
- Recommended on models with 3.5-6-ines of short arm lift or 2.5-6-ines of long arm lift.
Jeep: 12-18 Wrangler JK 4WD, 12-18 Wrangler Unlimited JK 4WD
- Collapsed Length: 34.5in
- Extended Length: 38in
- Eliminates contact between the stock drive shaft and oil pan on automatic transmission models
- After lifting your Jeep JK Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues
- Includes Brute Force Red seals
- Includes better quality CV joints
- Shaft strength is twice as strong as the factory equipped drive shaft
- Grease fittings are out of way of the transmission oil pan
This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Manufacturer: Rough Country Suspension Systems; Part Number: 5071.1A; Weight (Lbs): 27; Install Time (Hours): 2-3;Kit Contents: Extended CV drive shaft, flanges/yokes, and hardware;Fits Dana 30 and Dana 44 front axles only; Recommended on models with 3.5-6-inches of short arm lift or 2.5-6-inches of long arm lift
