Rough Country

Rough Country 6-inch 4-Link Suspension Lift System 583.20

Rough Country 6-inch 4-Link Suspension Lift System 583.20

Rough Country

Write a Review
SKU:
DHTP-583.20
Availability:
Please Call For Availability
Now: $1,699.95

Rough Country 6-inch 4-Link Suspension Lift System 583.20

  • Kit Contents: Front: Coil springs, upper and lower control arms, sway bar link extensions, track bar relocation bracket, pitman arm, steering stabilizer relocation bracket
  • Rear: Leaf springs and u-bolts
  • Shocks: (4) Premium N2.0 Shocks

 

Ford: 05-07 F250 Super Duty 4WD, 05-07 F350 Super Duty 4WD

  • 100 percent simple bolt-on installation
  • Easy Bolt-On Installation
  • Increased ground clearance
  • Levels the front of the vehicle with the rear
  • Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability
  • Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use

 

Rough Country's 6-inch 4-Link Suspension Lift System - 583.20

Kit Contents: Front: Coil springs, upper and lower control arms, sway bar link extensions, track bar relocation bracket, pitman arm, and steering stabilizer relocation bracket; Rear: Leaf springs and u-bolts; Shocks: (4) Premium N2.0 Shocks;Fits Gasoline engine models only; Gasoline engine models will require exhaust modification to clear the front drive shaft;Manufacturer: Rough Country Suspension Systems; Part Number: 583.20; Weight (Lbs): 376.9; Install Time (Hours): 6-8; Recommended Tire Size: 37-by-13.50

We're currently collecting product reviews for this item. In the meantime, here are some company reviews from our past customers sharing their overall shopping experience.

  • 5
    505 (88%)
  • 4
    55 (10%)
  • 3
    12 (2%)
  • 2
    1 (0%)
  • 1
    2 (0%)
97% of customers rate this company 4- or 5-stars
Newest to Oldest
  • Highest to Lowest
  • Newest to Oldest
  • Favorite Reviews
All Ratings
  • All Ratings
  • 5 ★ Reviews
  • 4 ★ Reviews
  • 3 ★ Reviews
  • 2 ★ Reviews
  • 1 ★ Reviews
Matthew L. Verified Customer   
04-12-25

Fantastic

Recommend this Company
5 / 5
Vitas V. Verified Customer   
04-12-25

The straight -4 JIC to 1/8 NPT adapter fittings they sent me were wrong. The ones they sent were -4 JIC to 1/8 BSP. I'm sure it was just an error made by their supplier but that doesn't change the fact that I had to waste my time and money (almost 20% of the kit cost) chasing down the correct parts. Compare the threads of the Swag fittings to that of the replacement fitting. The two close to each other are Swag and the 90 degree fitting has the correct NPT threads and matches the replacement fittings threads.

Recommend this Company
1 / 5
Cory M. Verified Customer   
04-12-25

Website easy to use and locate parts I needed

Recommend this Company
5 / 5
Questions & Answers
avatar
Popular Questions

No questions have been asked yet, ask your question above.

Shopper Approved Q&A Shopper Approved Q&A Answerbase
view