Rough Country 4-inch X-Series Suspension Lift System 66130
- Contents: Lft coil springs, Up and Lwr Adj X-Flex control arms, track bar drop brkt, forged Adj front track bar, stainless steel brake lines, drop pitman arm, sway bar discon
- Lft coils springs, Up and Lwr Adj X-Flex control arms, track bar
Jeep: 97-06 Wrangler TJ 4WD; 04-06 Wrangler Unlimited TJ; 04-06 Wrangler Unlimited LJ
- Easy, 100% Bolt-On Installation
- Lower joints pivot up to 35 degrees
- Upper joints pivot up to 20 degrees
- Lower joints pivot up to 35 degrees
- Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
- Quick disconnects easily store out of way when not in use
- X-Flex control arms:
- Clevite OEM style rubber bushings
- Flex joints with 2.5in diameter body and huge 1.25in threads
- Fully rebuildable and greasable
- Adjustable retainer ring
- Upper joints pivot up to 20 degrees
Venture far beyond the limits of a stock Wrangler with Rough Country's all-inclusive 4-inch X-Series Lift for Jeep TJ. Level the front of your vehicle with the rear while gaining enough increased ground clearance to run up to 33-inch tires. Rough Country's X-Series line represents the best-in-class equipment for off-road action, including X-Flex Adjustable Control Arms, Clevite Rubber Bushings, Sway-bar quick disconnects, and our premium N3 shocks for optimum off-road performance. For those who are serious about flexing, crawling, and pushing your Jeep to the limits, this kit features an upgraded Forged Adjustable Track Bar. Made of forged steel, this 16lb Track Bar boasts a beefy construction that will dwarf stock equipment. Easy to install and fully adjustable on the vehicle.
Kit Contents: Front: Lifted coil springs, upper and lower adjustable X-Flex control arms, track bar drop bracket, forged adjustable front track bar, stainless steel brake lines, drop pitman arm, and sway bar disconnects; Rear: Lifted coils springs, upper and lower adjustable X-Flex control arms, track bar drop bracket, lower shock brackets, and stainless steel brake line; Shocks: (4) Premium N3 Shocks;Tranfer Case Drop kit (97-02: #1668TC 03-06: #1669TC) or Slip Yoke Eliminator (#50-7906 - Only fits NP231 transfer cases) with CV drive shaft is recommended to avoid driveline vibration; "Rubicon" models do not need SYE kit or transfer case drop, but CV drive shaft is still recommended;Manufacturer: Rough Country Suspension Systems; Part Number: 66130; Weight (Lbs): 175.39; Install Time (Hours): 6-8; Wheel Backspacing (Inches): 4.5; Recommended Tire Size: 33-by-12.50
