GASKETS & SEALS

TURBOCHARGER GASKET INSTALLATION KIT FITS 11-16 GM 6.6L LML & LGH DURAMAX DIESEL ENGINES This kit is a must have if you are removing a failed turbo and installing a new turbo.  This kit will provide you with all the required gaskets and seals...

GM EGR Valve Gasket Between EGR Cooler Assembly 2011-2016 GM 6.6L Duramax LML 98065521For 2011, 2012, 2013, 2014, 2015, 2016 GM 6.6L Duramax LML Between EGR Cooler Assembly

GM EGR Recirculation Pipe Gasket LML 2011-2016 Duramax 98065523For 2011, 2012, 2013, 2014, 2015, 2016 Duramax

GM Exhaust Gas Circulation EGR Valve Cooler Gasket 2011-2016 GM 6.6L Duramax LML 98065520For 2011, 2012, 2013, 2014, 2015, 2016 GM 6.6L Duramax LML

GM Up Pipe To EGR Gasket Cooler Bypass 2011-2016 GM 6.6L Duramax LML 98065519For 2011, 2012, 2013, 2014, 2015, 2016 GM 6.6L Duramax LML

GM EGR Valve Gasket 2011-2016 GM 6.6L Duramax LML 98062923For 2011, 2012, 2013, 2014, 2015, 2016 GM 6.6L Duramax LML

GM Intake Y Bridge Gasket 2006-2016 GM 6.6L Duramax LBZ LMM LML LGH 97363570Molded Rubber Gasket at Y- Bridge, 2 are required

GM Engine Oil Cooler Seal 2001-2016 GM 6.6L Duramax LB7 LLY LBZ LMM LML 97358847Note- From 2001-2004 original coolers used a flat metal gasket where cooler separates. This seal will not replace that gasket and cooler should be replaced.

GM Turbo Oil Feed Seal 2004.5-2016 GM 6.6L Duramax LLY LBZ LMM LML 97331137For 2004.5, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 GM 6.6L Duramax LLY LBZ LMM LML

GM Upper Valve Cover Grommets 2004.5-2016 GM 6.6L Duramax LB7 LLY LMM LML 97315638   For 2004.5, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 GM 6.6L Duramax. LB7 LLY LMM LML

GM Thermostat Housing Gasket 2001-2016 GM 6.6L Duramax LB7 LLY LBZ LMM LML 97223686Thermostat crossover housing to cylinder head, 2 are required.

GM Oil Cooler Elbow Gasket 2001-2016 GM 6.6L Duramax LB7 LLY LBZ LMM LML 97192666This gasket mounts on the oil cooler body, between elbow to rear cover.Always replace this gasket if the elbow is removed from the oil cooler during service to prevent...