1999-2003 FORD 7.3L POWERSTROKE
Banks Techni-Cooler Intercooler system includes mandrel-bent 3 high-flow boost tubes large, high-efficiency all-aluminum end tanks instead of the wimpy stock plastic ones that can rupture under high-boost conditions a high-flow inlet that distributes air evenly across the intercooler for an 18% increase in flow and more effective cooling a wide-open outlet and a thicker core area with impressive volume. Because the stock manifold inlet in early 99 Power Strokes flows more air to one side of the cylinder bank than to the other, Banks developed an innovative Twin-Ram manifold inlet assembly that flows air equally to both sides of the engine for smooth, even power delivery
Techni-Cooler provides the maximum reduction in boost air temperature with a minimal loss of boost pressure. Cooling the air makes it denser and more oxygen rich, improving combustion and engine efficiency. Result: higher continuous power and more power at any exhaust gas temp (EGT), better fuel economy and lower EGTs. What could be cooler than that? Mounting hardware included.
2-Year Ltd Warranty
Application Notes
1999 Power Stroke variations: Ford trucks for model year 1999 fall into three categories: 1999; early 1999-1/2; late 1999-1/2. It is important to know the specific model. Check the build date on the tag inside the drivers door, then match below:
1999 model yearbuilt prior to 1/99; with catalytic converter
Early 1999-1/2 model yearbuilt prior to 1/99; no catalytic converter; intake manifold has 2"-diameter inlets
Late 1999-1/2 model yearbuilt on or after 1/99; no catalytic converter; intake manifold has 3"-diameter inlets
Note: Banks Techni-Cooler comes with an all black appearance. Banks logo is for display purposes only.
