Rough Country 2.5-3-inch Suspension Leveling Kit 870

Kit Contents: Strut extensions, differential mounting spacers, skid plate spacers, bump stops, hardware
Does not fit "XSP-X" models
Does not fit "TRD Pro" models
TRD models may not require included shims.

Toyota: 07-18 Tundra 4WD

Increased ground clearance
Maintains factory ride quality
Easy, 100% Bolt-On Installation
Truck can be easily returned to stock
Levels the front of the vehicle with the rear of the vehicle
Allows factory front skid plate to be used
Adjustable
Shim plates allow you to fine tune the front amount of lift
Allows for up to 33in tires
Differential spacers maintain proper front CV axle angle
No strut disassembly or strut compressor required for installation

Rough Country's 2.5" - 3" Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.

Kit Contents: Strut extensions, differential mounting spacers, skid plate spacers, bump stops, and hardware;Does not fit "XSP-X" models; Does not fit "TRD Pro" models; TRD models may not require included shims;Manufacturer: Rough Country Suspension Systems; Part Number: 870; Weight (Lbs): 9.6; Install Time (Hours): 2-3; Wheel Backspacing (Inches): Factory; Recommended Tire Size: 285/65